Referral Use Case Suggestions

Overview

Referral links work across a wide range of scenarios — from simple profile sharing to multi-creator campaign tracking. Below are the most common use cases along with the setup required for each.

1. Shareable Profile Link

The simplest link you can share. Sends followers directly to your ProAngler profile. No setup required.

proangler.com/{your-handle}

Setup: None. Your profile is live the moment you create your account.

Best for: Bio links, email signatures, social media profiles, and general promotion. Use this when you just want people to find you.

Example: BillyBob puts proangler.com/billybob in his YouTube description and every platform bio. Fans who click land on his full profile — videos, products, blog, and gear all in one place.

2. Shareable Profile Link That Tracks Traffic

Same destination as above, but routed through the referral system so every click is logged. You can see how many people are visiting your profile, when, and from where.

r4n.me/{your-handle}

Setup: No additional configuration needed. This is your default referral — it exists automatically for every account.

Best for: Tracking how much traffic a specific campaign, post, or platform is driving to your profile. Use a different link per platform to compare performance.

Example: BillyBob uses r4n.me/billybob in his YouTube description and proangler.com/billybob everywhere else. After 30 days he can see exactly how much of his profile traffic came from YouTube specifically.

3. Shareable Profile Link That Navigates to a Plugin Section

Send followers directly to a specific section of your profile — events list, featured products, waitlist, featured videos, and more. The browser scrolls directly to that section on arrival without any extra clicks.

r4n.me/{your-handle}/{slug}

Setup: Create a referral with Anchor Redirect enabled and select the target plugin section from the dropdown in the referral editor.

Best for: Promotions tied to a specific plugin. Drop the link in a video, a post, or a newsletter and send people exactly where you want them — no hunting around your profile required.

Example: BillyBob drops r4n.me/billybob/gear in his YouTube video description and says "my full tackle list is in the link below." Followers click, land on his profile, and the browser scrolls straight to his Featured Products plugin. He can see how many clicks came from that video.

4. Shareable Product Page Link

A direct link to a single product page. No referral system involved — use this for general sharing when tracking is not needed.

proangler.com/{your-handle}/{product-slug}

Setup: Set a product slug when creating the product. The page is live immediately.

Best for: Quick sharing when you just want to point someone to a specific product. Comments, DMs, or anywhere tracking isn't a priority.

Example: Someone in the comments asks "what rod are you using?" BillyBob replies with proangler.com/billybob/g-loomis-nrx and the fan lands directly on the product page with the full specs, retailer link, and price.

5. Shareable Product Page Link That Tracks Traffic

Routes followers through the referral system before landing on your product page. Every click is logged and referral context is carried through — enabling attribution, Angler Points rewards, and future analytics.

r4n.me/{your-handle}/{referral-slug}

Setup: Create a referral and set the Target Slug to match your product slug. Connect the product to the referral in the referral editor.

Best for: Any time you want to know how many people clicked through to a specific product and where they came from. Use this version of the link everywhere instead of the direct product URL.

Example: BillyBob is promoting a Booyah frog in his summer frog fishing series. He creates a referral r4n.me/billybob/booyah-frog that routes to his Booyah frog product page. He drops the link in his video descriptions and pins it in his comment section. After the series wraps he can see exactly how many people clicked through to that product across all his videos.

6. Shareable Product Grouping Page That Tracks Traffic

Group multiple related products under a single referral slug and route followers to a page that shows them all together. One link, one destination, multiple products.

r4n.me/{your-handle}/{referral-slug}

Setup: Create a referral, set a target slug, and connect up to 3 products to that slug in the referral editor or product editor. All connected products appear together on the destination page.

Best for: Gear bundles, "what's in my tackle box" collections, full rig breakdowns, or sponsor product showcases. Ideal when your audience wants the whole setup, not just one piece.

Example: BillyBob does a finesse drop shot video and wants to share the complete rig — rod, reel, and line. He creates r4n.me/billybob/drop-shot-rig and connects his G. Loomis rod, Daiwa reel, and Seaguar fluorocarbon to that slug. Followers who click see all three products on one page with buy links for each.

7. Shareable Product Page Link With Recommendations

Same as a standard product referral, but with the Recommendation Engine enabled. Followers see AI-selected related products below the primary product content — more to explore, more reasons to stay.

r4n.me/{your-handle}/{referral-slug}

Setup: Create a referral, connect your product, and enable Recommendation Engine in the referral editor.

Best for: Increasing time on page and cross-selling related gear. Works especially well when your product catalog is deep and followers interested in one item are likely to want the full setup.

Example: BillyBob's r4n.me/billybob/booyah-frog referral has the Recommendation Engine on. A follower clicks through to the frog page and below it they see BillyBob's recommended heavy cover rod, braided line, and rod holder — products the AI pulled from his catalog based on relevance. One click turns into three product views.

8. Referral Link That Redirects to an Internal ProAngler Page

Track the click and send followers to any page within ProAngler — a signup page, a specific creator's profile, or any internal URL — while keeping everything measured.

r4n.me/{your-handle}/{slug}  →  proangler.com/auth/signup

Setup: Create a referral, enable Pass-Through Mode, select Internal URL, and enter the path (e.g. /auth/signup). Attribution codes are appended automatically so you can see who referred the signup.

Best for: Driving new user signups, referring followers to another creator's profile, or directing traffic to a specific platform page during a campaign.

Example: BillyBob tells his YouTube audience to join ProAngler and create their own profile. He drops r4n.me/billybob/join in his description. Every click routes to proangler.com/auth/signup?code=billybob — tracking exactly how many signups came from his channel. When he later runs attribution on signups, he can see his conversion rate from viewer to registered user.

9. Referral Link That Redirects to an Affiliate or External URL

Track the click, log the attribution code, and then send followers to an external website — a retailer, brand landing page, or affiliate URL where you earn a commission.

r4n.me/{your-handle}/{slug}  →  https://tacklewarehouse.com/product-page

Setup: Create a referral, enable Pass-Through Mode, select External URL, and paste the full destination URL including your affiliate tracking parameters.

Note: Attribution codes are not appended to external URLs. Angler Points are not earned through external pass-through links. The click is still logged.

Best for: Affiliate programs where the retailer provides a tracked link. Use the referral system to count your clicks on your end independently of the retailer's own analytics. Two sources of truth are better than one.

Example: BillyBob has a Tackle Warehouse affiliate link for his frog setup. He creates r4n.me/billybob/tw-frog that passes through to his TW affiliate URL. His referral log counts how many people clicked from ProAngler. His Tackle Warehouse affiliate dashboard counts how many purchased. Comparing the two tells him his conversion rate.

10. Multi-Platform Attribution: Same Link, Different Sources

Run the same promotion across YouTube, Instagram, TikTok, and email — and know exactly which platform is driving the most traffic without creating separate referral records.

r4n.me/{your-handle}/{slug}?c=youtube
r4n.me/{your-handle}/{slug}?c=instagram
r4n.me/{your-handle}/{slug}?c=tiktok
r4n.me/{your-handle}/{slug}?c=email

Setup: Create one referral. Append ?c= with any label to the base URL for each platform. The attribution code can be any ProAngler handle — or use your own handle as a generic label across all of them.

Best for: Understanding which platform delivers the most engaged audience for a specific campaign. Useful for deciding where to focus your content energy or how to price sponsored posts.

Example: BillyBob is running a summer frog fishing campaign across all his platforms. He uses r4n.me/billybob/summer-frog?c=youtube, ...?c=instagram, and ...?c=tiktok. After 30 days his referral log shows YouTube sent 2,400 clicks, Instagram sent 800, and TikTok sent 3,100. He knows where his most active audience lives.

11. Seasonal or Time-Limited Campaign Link

Run a promotion with a hard end date. The link works during the campaign and falls back gracefully when it's over — no broken links, no manual cleanup.

r4n.me/{your-handle}/{slug}

Setup: Create a referral and set an Expiration Date. After that date the link redirects to your profile instead of the campaign destination. The click is still logged even after expiration.

Best for: Tournament registrations, limited-time gear drops, event promotions, seasonal content, or any campaign with a defined end date. Set it and forget it.

Example: BillyBob is promoting early registration for a bass tournament he's hosting in August. He creates r4n.me/billybob/tournament pointing to his events plugin with an expiration date of August 1st. He drops the link everywhere. After August 1st, latecomers who click the old link land on his profile instead of getting a dead end — and the link silently stops working without BillyBob having to remember to deactivate it.

12. Sponsor-to-Creator Campaign: One Link, Many Creators

A brand or sponsor creates a single referral link and distributes it to multiple content creators. Each creator appends their own ProAngler handle. Traffic is attributed per creator with zero additional setup on the sponsor's end.

r4n.me/{sponsor-handle}/{slug}?c={creator-handle}

Setup: Sponsor creates one referral. Sends each creator the base URL and asks them to append ?c={their-handle}. No new referrals, no new accounts, no additional configuration.

Best for: Brand ambassador programs, sponsored content campaigns, or any situation where a brand wants to measure which creators are most effective at driving traffic or signups.

Working Example: Toyota Waitlist Campaign

Toyota wants to drive traffic to their First Come / First Serve Early Ordering Waitlist and know which content creators are sending the most followers — and which convert the best.

What Toyota does:

1. Launches a Wait List plugin on their ProAngler profile at proangler.com/toyota
2. Creates a single referral with Anchor Redirect enabled, targeting the waitList plugin section
3. Sends each content creator the base URL with their handle appended:

r4n.me/toyota/waitlist?c=BillyBob     →  proangler.com/toyota?code=BillyBob#waitList
r4n.me/toyota/waitlist?c=JohnnyJoe    →  proangler.com/toyota?code=JohnnyJoe#waitList
r4n.me/toyota/waitlist?c=MarkyMark    →  proangler.com/toyota?code=MarkyMark#waitList

What happens:

All three links use a single referral record. Each click is logged with the creator's handle as the attribution code. The follower lands on Toyota's profile and the browser scrolls directly to the waitlist plugin. The ?code= parameter travels with the follower and is available to the waitlist signup form to capture alongside the submission.

What Toyota can see:

MarkyMark sent the least traffic but converted at more than double the rate of anyone else — his audience is more aligned with Toyota's product. One referral link. Three creators. Full per-creator attribution.

Attribution: One Link, Many Sources

Any referral link accepts a ?c= parameter with a ProAngler handle. This is how a single link scales to unlimited traffic sources without creating separate referral records for each one.

r4n.me/{handle}/{slug}?c={partner-handle}

If the ?c= parameter is missing or the handle is not a registered ProAngler account, the click still completes — it is logged as organic traffic without an attribution code. No errors, no broken redirects.

The handle requirement is intentional. Attribution is tied to real, registered ProAngler accounts. This creates a platform incentive for partners and creators to join, and keeps attribution data meaningful rather than filled with arbitrary strings.